System Board Options - NEC POWERMATE PROFESSIONAL 9000 Service Manual

Replace the slot cover and slot cover screw.
6.
Replace the drive cage (see "Replacing the Drive Cage").
7.
Replace the left cover of the system unit (see "Replacing the Covers").

SYSTEM BOARD OPTIONS

This section describes how to remove and replace the system board. This section also
describes how to change options on the system board. System board options that can be
changed include:
T
adding memory modules
T
upgrading the processor
T
changing jumper settings.
Figure 3-8 Removing an Expansion Board
The following figure shows the locations of the
sockets and connectors on the system board.
Option Installation 3-11