NEC POWERMATE PROFESSIONAL 9000 Service Manual page 135

NOTE: In Windows NT 4.0 systems, the
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
2. After you select the FAT type, a warning screen appears indicating that the
system is about to partition and format your hard disk using the FDISK program.
This warning screen (see the following figure) contains three options: Back, Exit,
and Continue.
T
Click to return to the Partition Information screen.
Back
T
Click to terminate the restore process.
Exit
T
Click
Continue
3. If you click
Continue
selected and reboots the system. After the reboot, all partitions are formatted.
When all the partitions have been formatted, the OS loads from the CD. The
Installing Applications screen appears (as shown below). This screen also displays
the version of Windows OS being installed.
to perform FDISK.
Figure 2-19 FAT16 Partition Screen
, the system performs FDISK using the FAT type you
Setup and Operation 2-53