NEC POWERMATE PROFESSIONAL 9000 Service Manual page 92

2-10 Setup and Operation
Figure 2-11 Basic CD-ROM Reader Controls and Indicators
The CD-ROM reader shown in Figure 2-11 may look different from the one installed in the
computer.
To load a disc in the CD-ROM reader, follow these steps.
1. Press the open/close button. The CD tray opens.
Put the CD, printed side up, into the tray.
2.
Press the open/close button. The tray closes.
3.
4. To remove the CD, press the open/close button. The tray opens, allowing removal
of the CD.
The system ships with the Auto Insert Notification feature of the Windows 95 operating
system enabled for the CD-ROM reader. If the program on the CD-ROM is based on the
Windows 95 operating system, the CD-ROM player starts as soon as the CD is inserted into
the drive and the tray is closed.
NOTE: If the Auto Insert Notification is
enabled, the system does not automatically enter
Power Management. For information on enabling
and disabling Auto Insert Notification, see
"Setting Auto Insert Notification" later in this
section.