NEC POWERMATE PROFESSIONAL 9000 Service Manual page 127

8. At the Add/Remove Programs Properties window, click
Configure the traps, communities, and other policies with the Policy Editor as follows.
In the Windows taskbar, click
1.
System Tools
2. At the "System Policy Editor," click
Local Computer
3. Expand
Network
T
Communities — Specifies one or more groups of hosts that this computer
belongs to and that can be managed with SNMP.
T
Permitted Managers — Limits the set of SNMP management applications that
can access this computer to those with the IP or IPX addresses that the user
provides.
T
Traps for "Public" Community — Limits the set of computers that receive
traps from this computer to those with the IP or IPX addresses that the user
provides.
T
Internet MIB (RFC 1156) — Allows the user to specify a contact name and
location for the Internet MIB.
4. Check each policy required and highlight the policy name.
T
For Communities, Traps, and Permitted Managers, click
the policy as appropriate.
Start
. Click
System Policy Editor
.
and expand
SNMP
NOTE: For an SNMP management console,
such as the NEC Desktop Manager and HP
OpenView, IP addresses (for example,
157.123.176.100) must be entered in the Traps
for "Public Community" to receive traps from
the NEC SNMP agents.
For the NEC SNMP Agent to send a trap to
the NEC SNMP Desktop Manager, the port
number can be configured from the registry:
"HKEY_LOCAL_MACHINE\SOFTWARE\Packard
Bell NEC,Inc.\PBNEC SNMP Desktop Agent\Port
. The default port number is set to
Number"
55593.
Setup and Operation
, and point to
Programs
.
and point to
File Open Registry
to display the list of policies. The policies are:
2-45
.
OK
, , and
Accessories
. Double click
and configure
Show