Clear User Password - NEC POWERMATE PROFESSIONAL 9000 Service Manual

2-24 Setup and Operation
2. Select
Set Supervisor Password
arrow keys.
With the password field selected, press
3.
T
If you are setting a password for the first time, Setup displays a dialog box
with the following prompts:
Type the password (passwords are not case sensitive) and press
Reenter the password and press
T
If you are changing a password, Setup displays a dialog box with the
following prompts:
Type the current password and press
. Reenter the new password and press
Enter
Use the left or right arrow key to select
4.
5. Use the up or down arrow key to select
6. At the prompt aski-ng you to confirm that you wish to exit Setup, press
The password takes effect the next time you power on the system. The next time
you power on you will be prompted for a password. You must enter a password
to access the system.

Clear User Password

If you wish to clear the user password, select the Clear User Password field and press
.
Enter
or
NOTE: Once the Supervisor Password feature
is enabled, the Setup Utility can only be accessed
by entering the password.
Enter new password:
Confirm new password: [
NOTE: The cursor changes to magenta during
password entry. The characters you enter do not
appear on the screen.
Enter current password: [
Enter new password:
Confirm new password:
with the up or down
Set User Password
.
Enter
[ ]
]
again.
Enter
]
[ ]
[ ]
. Type the new password and press
Enter
again.
Enter
.
Exit
Exit Saving Changes
.
Enter
. Press .
Enter
.
Enter