Quantum Viking; Seagate Cheetah - NEC POWERMATE PROFESSIONAL 9000 Service Manual

T
SCSI ID=13, A3, A2, and A0 jumpered
T
SCSI ID=14, A3, A2, and A1 jumpered
T
SCSI ID=15, A3, A2, A1, and A0 jumpered

Quantum Viking

The Quantum Viking 4.5-GB SCSI drive uses jumper blocks A3, A2, A1, and A0 to
configure the SCSI ID for the drive. See the documentation that comes with the drive for
more information on when and how to configure the drive. The SCSI ID jumpering is listed
below.
T
SCSI ID=0, no jumpers
T
SCSI ID=1, A0 jumpered
T
SCSI ID=2, A1 jumpered
T
SCSI ID=3, A1 and A0 jumpered
T
SCSI ID=4, A2 jumpered
T
SCSI ID=5, A2 and A0 jumpered
T
SCSI ID=6, A2 and A1 jumpered
T
SCSI ID=7, A2, A1, and A0 jumpered
T
SCSI ID=8, A3 jumpered
T
SCSI ID=9, A3 and A0 jumpered
T
SCSI ID=10, A3 and A1 jumpered
T
SCSI ID=11, A3, A1, and A0 jumpered
T
SCSI ID=12, A3 and A2 jumpered
T
SCSI ID=13, A3, A2, and A0 jumpered
T
SCSI ID=14, A3, A2, and A1 jumpered
T
SCSI ID=15, A3, A2, A1, and A0 jumpered

Seagate Cheetah

The Seagate Cheetah 9.1-GB SCSI drive uses pins 1 - 8 on jumper blocks J6 and J5 to
configure the SCSI ID for the drive. See the documentation that comes with the drive for
more information on when and how to configure the drive. The SCSI ID jumpering is listed
below.
T
SCSI ID=0, no jumpers
T
SCSI ID=1, pins 1 - 2 jumpered
T
SCSI ID=2, pins 3 - 4 jumpered
T
SCSI ID=3, pins 1 - 2 and 3 - 4 jumpered
Jumper Settings B-9