Configuring The Nec Snmp Agent For Windows 95 - NEC POWERMATE PROFESSIONAL 9000 Service Manual

2-44 Setup and Operation
1. For systems with NEC SNMP Agent on the NEC Select Install CD, insert the CD
in the CD-ROM reader. Locate and select the "NECUtil\SNMPAgent" directory
on the CD, double click
2. For systems without NEC SNMP Agent on the NEC Select Install CD, download
the software from the NECCSD web site (
download file in your C:\Temp directory or other appropriate directory. Double
click
setup.exe

Configuring the NEC SNMP Agent for Windows 95

The SNMP Agent is configured with the Windows 95 Policy Editor. The Policy Editor
configures the traps, communities, and other policies. You need the Microsoft Windows 95
Companion CD disc to install the Policy Editor on the system.
Install the Windows 95 Policy Editor as follows.
Close all applications in Windows before installing the Policy Editor.
1.
2. In the Windows taskbar, click
3. At the Control Panel, double click
At the Add/Remove Programs Properties window, click the
4.
and click
Have Disk
Insert the Microsoft Windows 95 Companion CD in the CD-ROM reader.
5.
Type the following in the Copy manufacturer's files from: field.
6.
E:\Admin\Apptools\Poledit
where
E:
Enter a check mark at "Group Policies" and "System Policy Editor" and click
7.
.
Install
NOTE: The NEC SNMP Agent software is
preloaded on some systems. Before installing the
NEC SNMP Agent on a client, check to see if
the software is installed. Look under
Files\PBNEC\PBNEC SNMP Desktop Agent
For systems without the NEC SNMP Agent
software, install the software from the NEC
Select Install CD-ROM disc or download the
software from the NECCSD web site
(
www.nec-computers.com
setup.exe
and follow the prompts.
Start
.
represents the CD-ROM drive.
C:\Program
.
).
, and follow the prompts.
www.nec-computers.com
, point to , and click
Settings
Add/Remove Programs
). Save the
.
Control Panel
.
tab
Windows Setup