NEC POWERMATE PROFESSIONAL 9000 Service Manual page 141

7. To partition the hard drive, click
screen. The Partition Information screen appears (in Windows 95 systems only; in
Windows NT 4.0 systems, the FAT16 Partition warning appears as described later
in this procedure).
The Partition Information screen has three options and lets you select the File
Allocation Table (FAT) type you want to use for the operating system restore:
T
Click to return to the Operating Mode screen.
Back
T
Click to select the FAT16 allocation table (current FAT type).
FAT 16
T
Click to select the FAT32 allocation table (available for Windows 95
FAT 32
systems only).
NOTE: Some older software may not work in a
Windows 95 system configured for FAT 32.
Figure 2-26 Partition Information Screen
NOTE: In Windows NT 4.0 systems, the
Partition Information screen does not appear.
Instead, the FAT16 Partition warning appears.
This screen is described in the following
paragraph.
8. After you select the FAT type, a warning screen appears indicating that the
system is about to partition and format your hard disk using the FDISK program.
This warning screen contains three options: Back, Exit, and Continue.
T
Click to return to the Partition Information screen.
Back
T
Click to terminate the restore process.
Exit
T
Click
Continue
Continue
to perform FDISK.
Setup and Operation
on the Partitioning the Hard Drive
2-59