NEC POWERMATE PROFESSIONAL 9000 Service Manual page 142

2-60 Setup and Operation
If you click
selected and reboots the system. After the reboot, all partitions are formatted.
When all the partitions have been formatted, the OS loads from the CD. The
Installing Applications screen appears (as shown below). This screen also
displays the version of Windows OS being installed.
After the OS finishes loading, the "Operating System Restore Completed" screen
appears.
Remove the CD from the CD tray.
9.
Click to reboot.
10.
OK
This completes the Custom Rebuild and Restore procedure.
Figure 2-27 FAT16 Partition Screen
, the system performs FDISK using the FAT type you
Continue
Figure 2-28 Installing Applications Screen
NOTE: The drivers and other software
components required for the operating system
are also loaded from the CD.