Configuring The Nec Snmp Agent For Windows Nt - NEC POWERMATE PROFESSIONAL 9000 Service Manual

2-46 Setup and Operation
T
Highlighting the "Internet MIB" policy opens the contact name and location
fields in the Policy window for editing.
Click and click
5.
File
Click and click
6.
File

Configuring the NEC SNMP Agent for Windows NT

Configure the NEC SNMP Agent for Windows NT as follows.
1. In the Windows taskbar, click
2. At the Control Panel, double click the
At the Network screen, click the
3.
At the Select Network Services screen, highlight
4.
5. At the Microsoft SNMP Properties screen, there are three properties that must be
set:
T
Security — Limits the set of computers than can perform SNMP management
on this computer to those in the community and/or specific computer names
the user provides.
T
Traps — Limits the set of computers that receive traps from this computer to
those in the community and/or specific computer names the user provides.
T
Agent — Allows the user to specify a contact name and location for the
computer.
Save.
.
Exit
Start
NOTE: For an SNMP management console,
such as the NEC Desktop Manager and HP
OpenView, IP addresses (for example,
157.123.176.100) must be entered in the Traps
for "Public Community" to receive traps from
the NEC SNMP agents.
For the NEC SNMP Agent to send a trap to
the NEC SNMP Desktop Manager, the port
number can be configured from the registry:
"HKEY_LOCAL_MACHINE\SOFTWARE\Packard
Bell NEC,Inc.\PBNEC SNMP Desktop Agent\Port
. The default port number is set to
Number"
55593.
, point to , and click
Settings
icon.
Network
tab and click
Services
SNMP Service
Control Panel
.
Add
, and click
OK
.
.