Lite-On Technology 24X Cd-Rom Reader; Goldstar 24X Cd-Rom Reader - NEC POWERMATE PROFESSIONAL 9000 Service Manual

T
CS: Cable Select jumper
T
SL: Slave Present jumper
Disabled, pin 2 open (factory default)
Enabled, pin 2 jumpered.
T
MA: Master Select jumper
Enabled, pin 3 jumpered (factory default)
Disabled, pin 3 open

Lite-On Technology 24X CD-ROM Reader

The Lite-ON Technology 24-speed CD-ROM reader has one jumper block on the back of
the reader. Jumpers on the block configure the reader as a master (factory set) or slave.
Descriptions of the jumpers are as follows:
T
CS (cable select) — enables/disables the cable select feature. Factory set at
disabled (pins not jumpered).
T
SL (slave) — enables/disables the slave feature. Factory set at disabled (pins not
jumpered).
T
MA (master) — enables/disables the master feature. Factory set at enabled (pins
jumpered).

Goldstar 24X CD-ROM Reader

The Goldstar 24-speed CD-ROM reader has one jumper block on the back of the reader.
Jumpers on the block configure the reader as a master (factory set) or slave. Descriptions of
the jumpers are as follows:
T
CS (cable select) — enables/disables the cable select feature. Factory set at
disabled (pins not jumpered).
T
SL (slave) — enables/disables the slave feature. Factory set at disabled (pins not
jumpered).
T
MA (master) — enables/disables the master feature. Factory set at enabled (pins
jumpered).
Not used
Jumper Settings B-11