NEC POWERMATE PROFESSIONAL 9000 Service Manual page 134

2-52 Setup and Operation
Click to do a basic operating system restore.
5. Auto
After you click
shown in the following figure. (In Windows NT 4.0, the FAT16 Partition warning
screen appears as described later in this procedure.)
The Partition Information screen that appears in Windows 95 has three options
1.
(Back, FAT 16, and FAT 32) and lets you select the File Allocation Table (FAT)
type you want to use for the operating system restore:
T
Click
Back
T
Click
FAT 16
T
Click
FAT 32
systems only).
NOTE: Click
Custom
and/or reformat your hard disk drive before
reinstalling the operating system.
To only reinstall the operating system while
leaving applications and data files intact, see
"Restore the Operating System."
in Windows 95, the Partition Information screen appears as
Auto
Figure 2-18 Partition Information Screen
to return to the Operating Mode screen.
to select the FAT16 allocation table (current FAT type).
to select the FAT32 allocation table (available for Windows 95
NOTE: Some older software may not work in a
Windows 95 system configured for FAT 32. In
addition, select FAT16 if a dual-boot system
(with Windows 95 and Windows NT 4.0) is
desired.
or to repartition
Auto