Removing The Power Supply Screws - NEC POWERMATE PROFESSIONAL 9000 Service Manual

5-12 Repair
2. Locate the power supply inside the chassis (see Figure 5-12).
3. Unplug the power cables from all installed devices.
4. Cut any tie wraps that may be securing the power cables to the system unit.
Remove the four screws securing the power supply to the back of the system unit
5.
(see Figure 5-13).
Remove the power supply from the system unit.
6.
Figure 5-13 Removing the Power Supply Screws
Figure 5-12 Power Supply