Creating Devices During Self-Registration - Mac Only - Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual

6. To set the account's expiration time, choose one of the options in the Account Expiration drop-down list. You
may set the account to never expire, or to expire at a preset interval of hours or days, or at a specified time.
If you choose any time in the future, the Expire Action row is added to the form. Use this drop-down list to
l
indicate the expiration action for the account—either delete, delete and log out, disable, or disable and log
out. The action will be applied at the time set in the Account Expiration row.
If you choose Account expires after, the Expires After row is added to the form. Choose an interval of hours,
l
days, or weeks from the drop-down list. The maximum is two weeks.
If you choose Account Expires at a specified time, the Expiration Time row is added to the form. Click the
l
button to open the calendar picker. In the calendar, use the arrows to select the year and month, click the
numbers in the Time fields to increment the hours and minutes, then click a day to select the date.
7. Use the Account Role drop-down list to assign the visitor's role.
8. In the Terms of Use row, first click the terms of use link and read the agreement, then mark the check box to
agree to the terms.
9. To commit your changes and create the device, click Create MAC. The Account Details and print options are
displayed. For more information, see

Creating Devices During Self-Registration - MAC Only

This section describes how to configure a guest self-registration so that it creates a MAC device account. Once the
guest is registered, future authentication can take place without the need for the guest to enter their credentials. A
registration can be converted to create a MAC device instead of standard guest credentials.
This requires a vendor passing a mac parameter in the redirect URL. ClearPass Guest does not support querying the
controller or DHCP servers for the client's MAC based on IP.
To edit the registration form fields, go to Configuration > Forms and Views. In the guest_register row, click the
Edit Fields link. The Customize Form Fields page opens. If you do not see mac or mac_auth in the list, click the
Customize fields link above the list. Click the Edit link in the field's row. In the Define Custom Field form, edit the
registration form fields:
Add or enable mac
l
UI: Hidden field
n
Field Required: checked
n
Validator: IsValidMacAddress
n
Add or enable mac_auth
l
UI: Hidden field
n
Any other expiration options, role choice, surveys, and so on can be entered as usual.
l
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
"Viewing and Printing Device Details " on page 49.
Creating Devices During Self-Registration - MAC Only | 51