About Visualrf Plan; Overview; Minimum Requirements; Installation - Dell PowerConnect W-Airwave User Manual

<status>down</status>
<uptime>0.0</uptime>
<radio index="1" phy="g" mac="00:20:A6:5A:63:66" beamwidth="0.0"
</radio>
</ap>
</site>
</amp:amp_site_inventory>

About VisualRF Plan

Overview

VisualRF Plan is a standalone Windows client that can be used for planning sites that do not yet use the AirWave
service on the Web. You can use VisualRF Plan to do basic planning procedures like adding a floor plan,
provisioning APs, and generating a Bill of Materials (BOM) report.
VisualRF Plan is free to use for anyone with a Dell support account. No license is required.
The client can be downloaded from the Dell software download center.

Minimum requirements

Must be installed on a Windows machine with the following minimum specifications:
250 MB Hard drive storage space

2 GB RAM

2.0 GHz dual-core CPU

NOTE: If installing VisualRF Plan on a VMWare virtual machine hosted by a Mac computer, you must disable Folder Sharing.

Installation

To install VisualRF Plan after you have downloaded it from the Dell support site:
1. The installer will prompt you for the location of the data directory. You must have access to the directory you
choose for the installation.
2. Choose a directory for auto-backup. The default is user directory.
3. Follow the rest of the instructions on your installation screen.
Dell PowerConnect W-AirWave 7.4 | User Guide
gain="1.5" antenna="" orientation="0.0" mount="Ceiling" valid="false">
<discovering-radio id="11276" index="1" dBm="-85" />
<discovering-radio id="11828" index="1" dBm="-93" />
Using VisualRF | 293