Ricoh Aficio 2022 User Manual page 804

Setting Originals
One-sided original/Two-sided
original selection
A When scanning one-sided orig-
inals, make sure that [1 Sided
Orig.] is selected.
B When
originals, press [2 Sided Orig.] to
select [2 sided orig.: T to T] or [2
sided orig.: T to B] according to
3
the binding orientation of the
original.
Top to top
original:
Top to bot-
tom original:
C When the last page of two-sid-
ed originals is blank, select [1
Side] to skip that side and fin-
ish scanning, or select [2 Sides]
to scan that side as a blank
page.
Note
❒ When [1 Side] is selected for
[Last Page], file size will be
bigger than the one for the
originals, and the e-mail can-
not be sent beyond the limit
of Max. E-mail Size. In this
case, change the setting of
[Max. E-mail Size] of [Scanner
Features].
D Press [OK].
38
scanning two-sided
R S
R S
R
R
S
S
B B B B
Make settings for Batch/SADF,
mixed original sizes, and original
orientation, and then press [Origi-
nal Feed Type].
Batch/SADF selection
A When scanning a large number
of originals by dividing the
originals and scanning them
individually or in batches,
check that either [Batch] or
[SADF] is selected.
Note
❒ Select [SADF], and the setting
of [Wait Time for Next Origi-
nal(s): SADF] of [Scan Settings]
of [Scanner Features] is availa-
ble. Or select [Batch], and the
machine waits until addi-
tional originals are set. See
p.39 "Scanning Originals in
Several Times".
Mixed size selection
A When originals of the same
width and different length are
placed, select [Mixed Size].
Note
❒ If [Mixed Size] is selected and
[Auto Detect] is selected for
scan size, the maximum size
detected is set as the scan
size. For originals smaller
than this size, a blank space
will appear in the resulting
image.