Ricoh Aficio 2022 User Manual page 424

Transmission Mode
When your e-mail address is
programmed with the user code
If your e-mail address is pro-
1
grammed with the user code, you
can select whether the machine
sends transmission by result e-
mail.
A Press [Yes] or [No].
Note
❒ If you select [Yes], a Trans-
mission Result Report is sent
to the programmed e-mail
address after the transmis-
sion so that you can check the
result of transmission.
E E E E
Press [OK] twice.
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode].
F F F F
Specify a destination, and then
press the { { { { Start} } } } key.
Note
❒ You can cancel the transmission
setup for User Transmission.
See p.19 "Canceling a Transmis-
sion".
6