Simplifying the Operation
D D D D
Select the program number you
want to delete.
E E E E
Press [Yes].
Note
❒ Press [No] not to delete the pro-
gram. The display returns to
that of step
F F F F
Press [Exit].
The standby display appears.
Using a Program
7
Note
❒ Using the program causes the pre-
vious settings to be cleared.
Example of executing a program
using Send Later with the fax
number "0123456789"
A A A A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the { { { { Facsimile} } } }
key.
128
C
.
B B B B
Place the original.
Note
❒ If you have no registered desti-
nations or scan settings as pro-
grams, enter the fax number of
the destination and select the
scan settings you require.
C C C C
Press the { { { { Program} } } } key.
D D D D
Select the program number you
registered.
The standby display appears.
T h e n , t h e p r o g r a m m e d f a x
number is shown. Transmission
Mode is selected.
E E E E
Press the { { { { Start} } } } key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission will start at the spec-
ified time.
ZLFS310N