Other Transmission Features
Programming the Stamp Sender
Name
A Press [Change] for Stamp Send-
er Name.
B Press the name of the user to be
stamped, and then press [OK].
4
Note
❒ The set user name is dis-
played when the user code
has been stored. See General
Settings Guide.
❒ You can switch titles by
pressing the title keys.
❒ To stamp a non-programmed
user name, press [Non-pro-
grammed Name], and then en-
ter the user name.
❒ If you do not want to stamp
the sender's stamp, press [*Do
not Stamp].
Programming the Reduced
Image Transmission
A Press [ON] for Reduced Image
TX.
Note
❒ Press [OFF] if you do not
want to do a reduced trans-
mission.
76
Programming the Auto Reduce
A Press [ON] for Auto Reduce.
Note
❒ Press [OFF] if you do not
want to use the Auto Reduce
function.
Programming the Default ID
Transmission
A Press [ON] for Default ID TX.
Note
❒ Press [OFF] if you do not
want to use ID transmission.
E E E E
Press [OK] twice.
F F F F
Specify the destination, and then
press the { { { { Start} } } } key.