Printing The User Parameter List; Special Senders To Treat Differently - Ricoh Aficio 2022 User Manual

Printing the User Parameter list

Print this list to see the current User
Parameter settings. However, only
items of importance or often-used
items are included in the list.
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Key Operator Tools].
D D D D
Press [Print List] next to [Parameter
Setting].
Note
❒ To cancel printing a list, press
[Cancel]. The display returns to
D
that of step .
E E E E
Press the { { { { Start} } } } key.
Note
❒ To cancel printing a list after
pressing the { { { { Start} } } } key, press
[Stop Printing]. The display re-
turns to that of step
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
Special Senders to Treat
Differently
By programming particular receivers
in advance, you can set the following
function for each receiver:
• Authorized RX (Authorized Re-
ception)
• Forwarding
• Reception File Print Qty
• Print 2 sided
• Memory Lock
• RX Reverse Printing (Reception
Reverse Printing)
• Paper Tray
Use the Own Name or Own Fax
Number to program your receivers. If
the receiver has a machine of the
same manufacturer, program an Own
Name that has already been pro-
grammed as a receiver. If the machine
is not of the same manufacturer, use
Own Fax Number. You can apply the
same settings to all programmed
numbers. You can then customize the
settings for individual numbers as
necessary using the Special Sender
Registration function.
The following items can be pro-
grammed.
• Special Senders (Up to 30. A maxi-
mum of 50 when the optional fax
D
.
function upgrade unit is installed.
A maximum of 20 characters for
each name when using G3.)
• Full/ Partial agreement
When you program own names
and facsimile names for multiple
destinations, you can program a
common sequence of characters to
identify destinations using Partial
agreement.
Using Key Operator Settings
9
163