Ricoh Aficio 2022 User Manual page 817

When selecting a sender from the
list
A Press [Attach Sender's Name].
B Select the sender.
Note
❒ When a protection code has
been set, a screen for entering
the protection code appears
after selecting the sender. En-
ter the protection code, and
then press [OK]. When the
protection code you entered
is correct, the sender name is
displayed.
C For a reception confirmation e-
mail, press [Return Receipt].
Sending Scan File by E-mail
Note
❒ When [Return Receipt] is se-
lected, an e-mail notifying
that the e-mail has been read
by the destination party is
sent to the sender selected
here. However, if the mailing
software used by the destina-
tion party does not support
MDN (Message Disposition
Notification), the e-mail may
not be sent.
D Press [OK].
Using a registration number to
specify a sender name
A Press [Attach Sender's Name].
B Use the number keys to enter
th e f iv e-d igit registration
number that has been assigned
to a sender.
If the entered number is less
than five digits long, press the
{ { { { #} } } } key after the last number.
Example: To enter 00008
Press the { { { { 8} } } } key, and then
press the { { { { #} } } } key.
4
51