Using The Installation Shell Script - Ricoh Aficio 2022 User Manual

UNIX Configuration

Using the Installation Shell Script

The installation shell script helps the setup process. The installation shell script
automates some of the tasks in configuring /etc/hosts, /etc/printcap; creating
1
the spool directory for BSD UNIX; and running the "lpadmin" command for
System V UNIX.
Preparation
The installation shell script can be used on the following workstations (it can-
not be used with other types of workstations):
• SunOS 4.x.x, 5.x
• Solaris 2.x, 7, 8
• HP-UX 8.x, 9.x, 10.x, 11.x
• Redhat Linux 5.2, 6.x, 7.0, 7.1, 7.2
• UnixWare 7.1.1
• OpenServer 5.06
Depending on security settings made at installtion, the "rsh"/"rcp"/"telnet"
commands may not be usable with Red Hat 7.1 or later versions. Change the
security level to allows use of "rsh"/"rcp"/"telnet". For more information
about how to change the setting, see the operating instructions for Red Hat.
When you use NIS (Network Information Service) or DNS, you should con-
figure the server before running the installation shell script.
For more information about the configuration utility of your operating sys-
tem, see the manual that comes with that utility.
4