Ricoh Aficio 2022 User Manual page 826

Sending Scan File by Scan to Folder
C Press [E-mail].
D Press [Exit].
The E-mail screen appears.
E Press [
The Scan to Folder screen ap-
pears.
F F F F
Specify the destination folder.
To specify the destination folder,
you can select it from the list, select
5
it by specifying a registration
number, enter the path for the
folder of the client computers on
the same network directly, specify
the folder in the FTP server, or se-
lect the destination from the client
computers on the same network.
When selecting a destination
folder from the list
A Press the title for the destina-
tion folder. The destination
folders for that title are dis-
played.
If the folder is not displayed,
press [U U U U ] or [T T T T ] to display the
other folders.
60
].
B Select the destination folder to
which the scan file is to be sent.
The selected folder is highlight-
ed and also is displayed in the
destination field at the top of the
screen.
Note
❒ If a protection code has been
set for the folder, a screen for
entering the protection code
appears.
C To select more destination
folders, repeat step B B B B .
Note
❒ To deselect a destination,
press the destination once
more, or press [U U U U Prev.] or [T T T T
Next] to display the destina-
tion in the destination field,
a n d t h e n
{ { { { Clear/Stop} } } } key.
Using a registration number to
select a destination folder
A Press [Registration No.].
B Use the number keys to enter
th e f iv e-d igit registration
number that has been assigned
to a destination folder.
If the entered number is less
than five digits long, press the
{ { { { #} } } } key after the last number.
Example: To enter 00003
p r e s s t h e