Ricoh Aficio 2022 User Manual page 1098

UNIX Configuration
ftp
Use the "put" or "mput" commands depending on the number of files to be
printed.
1
Limitation
❒ File names cannot contain "=", "," ,"_", or ";".
❒ It is not possible to set options with the "mput" command:
❖ ❖ ❖ ❖ To print one file
ftp> put file_name
❖ ❖ ❖ ❖ To print several files
ftp> mput file_name [file_name...]
Note
❒ You can use wild cards ("*" or "?") for the file name with the "mput" com-
mand.
The following procedure shows an example of how to print a file using the "ftp"
command.
A A A A
Start ftp using the IP address or host name of the printer.
% ftp IP_address
B B B B
Enter the user name. Leave the password field blank and press the { { { { RE-
TURN} } } } ({ { { { ENTER} } } } ) key.
Name:
Password:
C C C C
Set the file transfer mode to binary.
ftp> bin
Note
❒ If the file transfer mode is not set to binary, the image may not be printed
correctly.
D D D D
Print the file.
Note
❒ For example, to print the file named "file1":
ftp> put file1
❒ For example, to print the two files named "file1" and "file2":
ftp> mput
E E E E
Exit ftp.
ftp> bye
16
file1 file2