Ricoh Aficio 2022 User Manual page 986

Ricoh aficio 2022: user guide
Hide thumbs Also See for Aficio 2022:
Table of Contents

Advertisement

Appendix
❖ ❖ ❖ ❖ Display
Shows SNMP information and
available protocols.
msh> snmp ?
The following command displays
the settings of registered number
specified.
msh> snmp
[registered_number]
Omitting the number displays all
access settings.
msh> snmp [-p]
Note
❒ Add "-p" (as above) to have the
in formation d is pla yed one
screen at a time.
❖ ❖ ❖ ❖ Community name configuration
You can set the community name
of the registered number.
m sh > sn mp n umb er n am e
community_name
Note
❒ The community name can con-
sist of up to 15 characters.
❖ ❖ ❖ ❖ Access type configuration
You can select the access type from
9
those listed below:
msh> snmp number type
access_type
Access
type
read
write
trap
no
98
Type of access permitted
Read only
Read and write
User notified of trap mes-
sages.
All access denied.
❖ ❖ ❖ ❖ Protocol configuration
You should use the following com-
mand to set protocols to active or
inactive. If you set a protocol to in-
active, all access settings for that
protocol will be disabled:
msh> snmp {ip | ipx} {on |
off}|msh> snmp {ip | ipx}
{on | off}|msh> snmp {ip |
ipx} {on | off}
• "on" means active, "off" means
inactive.
To change an access setting proto-
col, use the following command.
However, if you have disabled a
protocol using the above com-
mand, making it active here will
have no effect.
msh> snmp number active
{ip | ipx} {on | off}
❖ ❖ ❖ ❖ Access configuration
You can configure a host address
according to protocols used.
The network interface board ac-
cepts requests only from hosts
with "read-only" or "read-write"
access type addresses. Enter "0" to
have the network interface board
accept requests from any host
without requiring a specific type of
access.
msh> snmp number {ip |
ipx} address
Note
❒ To specify TCP/IP protocol, en-
ter "ip" followed by a space, and
then the IP address.
❒ To specify the IPX/SPX proto-
col, enter "ipx" followed by a
space, and then the IPX address
followed by a decimal, and then
the MAC address of the net-
work interface board.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 2027Dsm622Dsm627Ld122Ld127

Table of Contents