World Trade - Printronix P7000 User Manual

Chapter 4
Coax/Twinax (CTHI) Emulation
Char Set Select
Specifies the print language used by the printer. Character sets are shown in
detail in the Character Sets Reference Manual.
Active Char Set
This option selects which group of character sets (Primary or Secondary) will
be active. Secondary Set is the default.
Prt Partial Line
•
Enable (default). Forces the printer to print a partial line (i.e., line not
ending with a LF) before moving to the top of form on the next page.
•
Disable. The last partial line of data will not be printed.
Device ID
This parameter defines the printer emulation as IPDS, 5225, or 4234-2. After
the emulation has been changed, a POR status is sent to the host. IPDS is
the default.
Device Address
Allows you to set the device address from 0 through 6. The host directs data
and commands on the twinax line to a specific device based on its unique
device address. After the address has been changed, a POR status is sent to
the host.

5225 World Trade

The 5225 emulation has a standard multinational character set that serves as
a base and 14 extended world trade character set assortments.
Cancel IGP/DCU
•
Enable (default). Cancels all buffers when a job is put on hold from the
host or the CANCEL key is pressed.
•
Disable. Does not cancel any internal buffer in the printer when a job is
put on hold from the host or the CANCEL key is pressed.
120