Product Description - Peri VARIOKIT VBC Assembly Instructions Manual

Introduction

Product description

Intended use
PERI products have been designed for
exclusive use in the industrial and com-
mercial sectors only by suitably trained
personnel.
The hydraulic system of the VBC Balanc
ed Cantilever Equipment is used to
transport the balanced cantilever equip-
ment from one concreting section to
the next.
Functionality
The balanced cantilever equipment is
lifted onto the chassis by means of hy-
draulic cylinders and is moved with hy-
draulic cylinders.
The constructional systems presented
in these Assembly Instructions are
shown in the form of examples with
only one component size. They are valid
for all component sizes contained in the
standard configuration.
Any deviations are described in the
project-specific planning.
VBC Balanced Cantilever Hydraulic System – Hydraulic System and Standard Cycle
Assembly Instructions
These Assembly Instructions
describe:
■
Lowering and raising the top and bot-
tom slab formwork
■
Activation of the front and rear
carriages
■
Hydraulic moving procedure of the
balanced cantilever equipment
■
Deactivation of the carriages
■
Advancing the rail to the next moving
section.
Not part of these Assembly
Instructions:
■
Transport and pre-assembly on the
construction site.
■
Installation on site (bridge pier).
■
Assembly of the rafters and
formwork.
■
Return journey to the bridge pier or
bridge bearing.
■
Dismantling of the formwork and
rafters.
■
Dismantling and removal.
This work is to be determined on a proj-
ect-specific basis and monitored by a
coordinator on the construction site.
7