Peri SB Brace Frame Instructions For Assembly And Use

Peri SB Brace Frame Instructions For Assembly And Use

For single-side walls

Advertisement

SB Brace Frame
For single-sided walls
Instructions for Assembly and Use – Standard Configuration
Edition 09 | 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB Brace Frame and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Peri SB Brace Frame

  • Page 1 SB Brace Frame For single-sided walls Instructions for Assembly and Use – Standard Configuration Edition 09 | 2015...
  • Page 3: Table Of Contents

    SB-L with Anchor Bracket SB-L VARIOKIT Connecting to the Systems Panel formwork Tie Technology Anchor System DW 15 Moving With the crane Application Possibilities Version 1, Version 2 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 4: Overview

    Overview Main components 20.4 20.3 20.2 20.1 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 5: Key

    For a better understanding, detailed il- lustrations are partly incomplete. The safety installations which have possibly not been featured in these detailed drawings must nevertheless be availa- ble. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 7: Introduction

    Health and Safety on Construction self or a qualified person selected by him. Sites 30 (RAB 30) Additional technical documentation PERI Design Information for SB Brace Frame Instructions for Use: – Pallets and Stacking Devices – Lifting Hook MAXIMO –...
  • Page 8: Intended Use

    PERI products have been designed for Concreting heights up to Permissible fresh concrete pressure on exclusive use in the industrial and com- SB Brace Frame SB-AO, A, B, C: 8.75 m vertical formwork 60 kN/m². SB Brace Frame SB-A, B, C: 6.75 m mercial sectors only by suitably trained personnel.
  • Page 9: Care And Maintenance Instructions

    Never clean powder-coated compo- nents, e.g. elements and accessories, with a steel brush or hard metal scraper; this ensures that the powder-coating re- mains intact. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 10: Safety Instructions F1

    Assembly and Use sup- risk assessment has been carried out by contractor must create installation in- plied by PERI are available at all times the contractor.On the basis of this risk structions in order to ensure safe as-...
  • Page 11: System-Specific

    PERI design ta- bles. For transportation, the surface must have sufficient load-bearing capacity.
  • Page 12: A1 Storage And Transportation

    Transportation PERI pallets and stacking devices are suitable for lifting by crane or forklift. They can also be moved with the PERI pallet lifting trolley. All pallets and stacking devices can be lifted using both the longitudinal and front sides.
  • Page 13 – max. height 2 stacks each with 6 Brace Frames. (Fig. A1.03) The number of stacks that can be trans- ported depends on the respective na- tional transport regulations. Fig. A1.03 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 14: A2 Tie Technology

    Lost anchor components: Brace Frame Double Anchor DW 15 1x Alternativ, see Fig. A2.03 Tie Rod DW 15 Threaded Anchor Plate DW 15 2x (Fig. A2.02) Fig. A2.02 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 15 Tie Rod DW 26 5.3 Hex. Nut DW 26, SW 46/150 Lost anchor components: Tie Rod DW 26 Threaded Anchor Plate DW 26 2x (Fig. A2.04) Fig. A2.04 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 16: Execution With Anchor Waler

    Panel formwork Girder formwork Girder circular formwork x = 160 x = 115 x = 265 for SRZ Profile U 100 (Fig. A2.06a) (Fig. A2.06b) (Fig. A2.06c) SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 17: Double Tie Yoke

    Panel formwork Girder formwork Girder circular formwork x = 160 x = 120 x = 260 for SRZ Profile U 100 (Fig. A2.08a) (Fig. A2.08b) (Fig. A2.08c) SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 18: Anchor Installation

    Leading Anchor Cou- Spanner SW 70. of the spanner. of the spanner. Wrench. Fill hole. pler. Concreting. Check tie rod to en- sure it is firmly in place. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 19: Anchor System Dw 15

    Tie Rod DW 26 Lost anchor components: 10 V-Tie Holder DW 26 12 Spacer Tube rough DR 42 Threaded Anchor Plate DW 26 Fig, A2.09d (Fig. A2.09d) SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 20: B1 Pre-Assembly

    SB-B and with the crane. 1. Place all required individual Brace Frames (SB-A0, A, B, C) in sequence 20.4 Fig. B1.02 SB-C on timbers. (Fig. B1.02) SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 21 Fig. B1.08 Load transfer Adjust formwork support SB-A0/A /B (20.8) according to the project plan on 20.5 the formwork used. SB-C (Fig. B1.09) 20.8 Fig. B1.09 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 22: B2 Connecting To The Systems

    – Take into account permissible widths of influence; see PERI Design Infor- mation Brace Frame SB. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 23 B4. Alternative Fig. B2.01c Hook Strap SB-1, 2 (33). Put board underneath as slide protec- tion. (Fig. B2.01d) Fig. B2.01d SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 24 The steel waler/Distribution Waler lies against the formwork support (20.8). (Fig. B2.02b) Fig. B2.03a Fig. B2.03b 4. For further work steps, see Section B2 VARIO GT 24 from Point 6. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 25 (Fig. B2.05) 6. For further work steps, see Section B2 VARIO GT 24 from Point 6. 7. Remove temporary push-pull prop Fig. B2.05 and kicker. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 26: Panel Formwork

    32.4 Sleeve SB-MAXIMO WDMX* 1x *with removable sealingRequired components per tie point: TRIO, DOMINO Connector SB-A, B, C - MX/TR/D 1x 32.3 Bolt SB-TRIO/DOMINO Fig. B2.06 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 27 fix with a wedge. 5. Fix additional Connectors SB to the anchor holes. Fig. B2.07 (Fig. B2.07) MAXIMO 32.2 / 32.4 32.1 TRIO 32.3 DOMINO 32.3 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 28 (Fig. B2.08 + B2.08a) For further work steps, see Section B2 VARIO GT 24 from Point 6. 32.5 20.8 Fig. B2.08b Fig. B2.08c SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 29 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 30: B3 Bracing

    40.1 PERI Design Information Brace Frame Fig. B3.01e SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 31 SB-A0, A, B, C h = 5.50 – 6.75 m h = 6.75 – 8.75 m h = 8.75 m Fig. B3.01f Fig. B3.01g Fig. B3.01h Fig. B3.02 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 32: B4 Moving

    SB-A, B, C 1400 kg spective transportable unit. SB-A0, A, B, C 2275 kg SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 33: With The Guide Roller

    Brace Frame. Moving Move unit slowly and without the help of any power-operated pulling means. 42.1 Fig. B4.03a Fig. B4.03b Fig. B1.05 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 34: C1 Connecting To The Systems

    – Take into account the permissible widths of influence and bracing: see PERI Design Information Brace Frame SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 35 11. Adjust height of the transportable unit with the spindles. Erection Erect, move, align and anchor transport- able unit with textile strap and crane, see C2. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 36 Additional components per Brace Frame when extending: Compensation Waler MAR 85 2x Tie Rod DW 15 Hook Tie Head DW 15 39.2 Wingnut Pivot Plate DW 15 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 37 1.0 t with a crane sling angle of ≤ 15°. Erect, move, align and anchor transport- able unit with the crane on the load-bearing points. Fig. C1.03 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 38: Up To H = 6.00 M

    – Take into account the permissible width of influence; see PERI Design Information Brace Frame SB. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 39 9. Adjust height of the transportable unit with the spindles. Erection Erect, move, align and anchor transport- able unit with textile straps and crane, see C2. Fig. C1.05a Fig. C1.05b SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 40 Frame when extending: Connector SB-1, 2 Compensation Waler MAR 85 2x Tie Rod DW 15 Hook Tie Head DW 15 39.2 Wingnut Pivot Plate DW 15 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 41 5. Fix Connector SB to both anchor 34.1 Fig. C1.06 holes with wedges (34.1). 6. Fix additional Connectors SB to the anchor holes. (Fig. C1.06) 34.1 32.2 / 32.4 32.1 / 32.3 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 42 1.0 t with a crane sling angle of ≤ 15°. Erect, move, align and anchor transport- Fig. C1.07a able unit with the crane on the load-bearing points. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 43: With The Crane

    The weight of the formwork with 60 kg/m² and the connecting compo- nents must be added to the weight of Fig. C2.03 Fig. C2.04 the respective transportable unit. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 44: D1 Pre-Assembly

    6. Position the Support (59) in the area Fig. D1.02 of the Anchor Bracket, and fix the Brace Frame on the element: see D2 Connecting to the Systems. SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 45: Sb-L Variokit

    PERI Design Information Brace Frame SB. – Take into account Instructions for As- sembly and Use of the respective sys- tem. 55.1 Fig. D1.05 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 46: D2 Connecting To The Systems

    2. Secure with Wingnut Pivot Plate (39.2). 3. Second Hook Tie is fixed in the same way. (Fig. D2.03 + D2.04) Fig. D2.03 Fig. D2.04 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 47: D3 Tie Technology

    Threaded Anchor Plate DW 15 2x Brace Frame Double Anchor DW 15 1x 10 V-Tie Holder DW 15 (Fig. D3.01 - D3.04) Fig. D3.03 Fig. D3.04 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 48: D4 Moving

    – MAXIMO and Corner Connector SRU VARIOKIT. (Fig. D4.01 + D4.01a) – DOMINO and Anchor Bracket SB-L. (Fig. D4.02 + D4.02a) DOMINO 39.1, 39.2 Fig. D4.02 Fig. D4.02a SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 49: Sb Brace Frame For Single-Sided Walls

    D5 Application Possibilities SB-L Version 1: Anchor Bracket SB-L Version 2: Corner Connector SRU VARIOKIT DOMINO 250 DOMINO 275 DOMINO 300 MAXIMO 270 TRIO 270 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 50: Procedure

    7. Fix Brace Frames to the ground using re-usable anchor parts on the anchor components, see A2. (Fig. E1.02) Are the element connections and an- chor components securely installed? Fig. E1.02 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 51: Procedure

    4. Attach transportable unit (element with Brace Frame) to the crane and move. 5. Clean transportable unit and move to new place of operation. 20.7 20.7 Fig. E2.02 Fig. E2.03 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 52: Dismantling

    20.7). 3. Stack Brace Frames of the same size and secure with steel strapping, see 20.6 20.5 SB-C (Fig. E3.04) 20.6 20.5 20.6 20.5 Fig. E3.04 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 53 1. Remove Adjustment Unit-2 (43) and pack separately for transportation. 2. Stack Brace Frames and secure with steel strapping, see A1. (Fig. E3.06) Fig. E3.07 Fig. E3.08 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 54: Application

    F1 Internal Corners Application The application is project-related! Important: during the planning phase of single-sided internal cor- ners, contact PERI! SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 55: F2 Use As Horizontal Heavy-Duty Bracket

    F2 Use as Horizontal Heavy-Duty Bracket PERI Brace Frames SB can also be used as heavy-duty brackets. This application allows the formation of larger working platforms (b ≤ 8.75 m) whilst simultane- ously accommodating high shear forces. The use is always project-related.
  • Page 56: Single Suspension

    (textile strap) and move. 5. Install working platform with the Wall Scaffold Hinges in the Scaffold Mounting Rings, and secure with bolts. (Fig. F2.02 + F2.03) SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 57 – Brace the working platform with diag- onals and secure open edges. – Ensure stability. Mount working platform (Fig. F2.05) See Single Suspension Brace Frame SB-A0, A, B SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 58: Double Suspension

    – Brace the working platform with diag- onals and secure open edges. – Ensure stability. Mount working platform (Fig. F2.07) See Single Suspension Brace Frame SB-A0, A, B SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 59 SB Brace Frame for single-sided walls Instructions for Assembly and Use – Standard Configuration...
  • Page 60: Components

    SB Brace Frame Item no. Weight kg 025690 412,000 Brace Frame SB-A0 Complete with For forming single-sided walls and special applica- 1 pc. 700555 Rear Base Spindle for SB tions. 1 pc. 700554 Adjusting Nut SB-A0/A/B 1 pc. 025730 Spindle TR 60 x 9/43 1 pc.
  • Page 61 SB Brace Frame Item no. Weight kg 025710 275,000 Brace Frame SB-B Complete with For forming single-sided walls and special applica- 1 pc. 700555 Rear Base Spindle for SB tions. 1 pc. 700554 Adjusting Nut SB-A0/A/B 1 pc. 025730 Spindle TR 60 x 9/43 1 pc.
  • Page 62 SB Brace Frame Item no. Weight kg 027690 0,368 Bolt SB-TRIO/DOMINO, galv. For panel formwork with 12 cm overall thickness. Accessories 114107 1,190 Sleeve SB-MAXIMO, galv. 114417 1,400 Sleeve SB-MAXIMO WDMX 113255 0,414 Bolt SB-MAXIMO, galv. For connecting MAXIMO panels with Brace Frame SB.
  • Page 63 SB Brace Frame Item no. Weight kg 025760 1,300 Waler Connector SB-A, B, C For connecting Steel Walers SRZ and SRU, Profile U100 respectively U120 to SB-A0, A, B, C. Accessories Wedge K, galv. 024250 0,331 024250 0,331 Wedge K, galv.
  • Page 64 SB Brace Frame Item no. Weight kg 027500 136,000 Brace Frame SB-1 Complete with For forming single-sided walls and special applica- 1 pc. 715110 Spindle SB-1, compl. tions. 1 pc. 018030 Spindle Tube TR 48-116/80, galv. 2 pc. 018270 Quick Jack Nut TR 48, galv.
  • Page 65 SB Brace Frame Item no. Weight kg 027590 2,400 Hook Strap for SB-1, 2 For fixing Brace Frame SB-1 and SB-2 to Steel Waler SRZ and SRU Profile U100 – U140. 116078 3,970 Hook Strap for SB-2, asymmetric For fixing Brace Frame SB-2 to Steel Waler SRZ and SRU Profile U100 –...
  • Page 66 SB Brace Frame Item no. Weight kg 100901 5,370 SB-L Tension Strut, l = 740 mm For Brace Frame SB-L. For forming single-sided walls. 100903 12,000 SB-L Anchor Bracket Complete with For Brace Frame SB-L. For forming single-sided 1 pc. 105400 Pin Ø 20 x 140, galv.
  • Page 67 SB Brace Frame Item no. Weight kg 102018 4,880 Base Plate-2 for RS 1000/1400, galv. Complete with For assembly of RS 210, 260, 300, 450, 650, 1000, 2 pc. 105400 Pin Ø 20 x 140, galv. 1400 push-pull props and Heavy Duty Spindles.
  • Page 68 SB Brace Frame Item no. Weight kg 017010 1,400 Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm. Scaffold Tubes Steel Ø 48.3 x 3.2 026415 3,550 Scaff. Tube Steel Ø 48.3 x 3.2, special length 026417 0,000...
  • Page 69 SB Brace Frame Item no. Weight kg 030840 0,516 Threaded Anchor Plate DW 15 Note For use with Tie Rod DW 15 or B 15. For anchoring Lost anchor part. in concrete. 030060 2,130 Brace Frame Double Anchor DW 15...
  • Page 70 SB Brace Frame Item no. Weight kg 031580 0,440 V-Tie Holder DW 15 For easy installation of DW 15 Tie Rods at 45° inclinations. 031631 0,345 Leading Anchor Coupler DW 15, compl. For easy installation of DW 15 Tie Rods at 45°...
  • Page 71 SB Brace Frame Item no. Weight kg 030860 0,801 Threaded Anchor Plate DW 20 Note For use with Tie Rod DW 20, B 20 or Screw-On Lost anchor part. Cone-2 M24/DW 20. For anchoring in concrete. 030590 0,685 Hex. Nut DW 20 SW 36/110, weldable Note For coupling Tie Rod DW 20 and B 20.
  • Page 72 SB Brace Frame Item no. Weight kg 030830 2,180 Counterplate DW 20, 120 x 120 x 20 Technical Data For anchoring with Tie Rod DW 20 and B 20. Permissible load 150 kN. 031590 0,420 V-Tie Holder DW 20 For easy installation of DW 20 Tie Rods at 45°...
  • Page 73 SB Brace Frame Item no. Weight kg Tie Rods DW 26 Note 030340 4,480 Tie Rod DW 26, spec. length Non-weldable! Take official approval into conside- 030500 0,000 Cutting Cost Tie Rod DW 26 ration! 030645 2,240 Tie Rod DW 26, l = 0.50 m Technical Data Permissible tension force 250 kN.
  • Page 74 SB Brace Frame Item no. Weight kg 030980 1,540 Hex. Coupler DW 26 SW 46/150, weldable Note For coupling Tie Rod DW 26. Weldable! Technical Data Permissible load 250 kN. 030970 0,800 Hex. Coupler DW 26 SW 46/80, weldable Note For anchoring with Tie Rod DW 26.
  • Page 75 SB Brace Frame Item no. Weight kg 031634 1,250 Spacer Tube rough DR 42, l = 3.00 m Plastic spacer tube for DW 20, 26. 101621 10,100 Tension Release Plate SB DW 26 Complete with For anchoring of Brace Frame SB. Allows easy 4 pc.
  • Page 76 For anchoring of Brace Frame SB. Permissible load 4 x 135 kN. 106661 32,000 Brace Frame Wall Scaffold Hinge For hoizontal use of PERI Brace Frames SB-A0, A, B and SB-2 as climbing brackets. Accessories 106662 4,870 Brace Frame Adaptor SB A0, A, B...
  • Page 77 SB Brace Frame Item no. Weight kg 111866 64,600 Wall Scaffold Hinge SB double For hoizontal use of PERI Brace Frames SB-A0, A, B as climbing bracket. 030940 3,040 Climbing Cone-2 M36/DW 26, galv. Note Tie System M36. Separate design information on request.
  • Page 78 SB Brace Frame Item no. Weight kg 030870 1,240 Threaded Anchor Plate DW 26 Note For use with Tie Rod DW 26 or Screw-On Cone Lost anchor part. M36/DW 26. For anchoring in concrete. Tie Rod DW 26 Note 030340 4,480 Tie Rod DW 26, spec.
  • Page 79 For fixing the M36 anchor system if the plywood formlining is not drilled through. Accessories 027212 0,445 Allen Key SW 14, long 710312 0,005 Nail 3 x 80 027212 0,445 Allen Key SW 14, long Fits to PERI Anchor Positioning Studs and Allen Key Bolts M16.
  • Page 80 PERI Formwork Systems, Inc. Pericofragens, Lda. PERI (L.L.C.) TOO PERI Kazakhstan www.peri.ca www.peri.pt www.perime.com www.peri.kz Lebanon Mexico Algeria Azerbaijan PERI Cimbras y Andamios, S.A. de C.V. S.A.R.L. PERI PERI Repesentative Office PERI Lebanon Sarl lebanon@peri.de www.peri.com.mx www.peri.dz www.peri.com.tr Panama Botswana Hong Kong Malaysia PERI Panama Inc.
  • Page 81 PERI Danmark A/S PERI S.p.A. PERI Sverige AB www.peri.dk www.peri.it www.periform.se www.peri.co.nz Estonia Lithuania Slovania PERI AS PERI UAB PERI oplate i skele d.o.o Europe www.peri.ee www.peri.lt www.peri.com.hr Albania Spain Luxembourg Slovakia PERI S.A.U. N.V. PERI S.A. PERI spol. s. r.o.
  • Page 84 Slab Formwork Climbing Systems Tunnel Formwork Bridge Formwork Shoring Systems Construction Scaffold Facade Scaffold Industrial Scaffold Access Protection Scaffold System-Independent Accessories Services PERI GmbH Formwork Scaffolding Engineering Rudolf-Diesel-Strasse 19 89264 Weissenhorn Germany Tel. +49 (0)7309.950-0 Fax +49 (0)7309.951-0 info@peri.com www.peri.com...

Table of Contents

Save PDF