Advertisement
A1 Storage and transportation
Moving on the construction site
■
Keep bushing and nipples of all
quick-couplers clean and fitted with
protective caps or coupled together
during transport.
■
Transport the hydraulic cylinder only
with the piston rod in a retracted
position.
■
Transport the hydraulic hoses rolled
up and do not drag them along the
ground.
Temporary storage on the construc-
tion site
■
Clean the bushings and nipples of all
quick-couplers and fit with protective
caps, or connect together.
■
Store the hydraulic cylinder only with
the piston rod in a retracted position.
■
Store the hydraulic hoses rolled up.
■
When storing, place the hydraulic cyl-
inder in its designated transport box.
■
Do not store hydraulic units horizon-
tally, as oil can escape through the
vent valve.
18
Transport from and to the construc-
tion site
■
Clean dirt off the hydraulic cylinders
and hydraulic units, and dry them.
■
Fit bushing and nipples of all
quick-couplers with protection caps
or couple them together.
■
Transport the hydraulic hoses rolled
up.
■
Fill the hydraulic cylinder and hydrau-
lic hoses with oil.
■
Transport the hydraulic cylinder only
with the piston rod in a retracted
position.
■
For transport, place the hydraulic cyl-
inders and hydraulic units in the
transport boxes provided and fix
them in place.
■
Do not transport hydraulic units lying
down, as oil can escape through the
vent valve.
■
When moving transport crates with
the crane, use only suitable lifting
slings that are wrapped around the
underside.
VBC Balanced Cantilever Hydraulic System – Hydraulic System and Standard Cycle
Longer storage periods
■
Do not drain the hydraulic oil during
downtime.
■
Protect connections against corro-
sion using a suitable preserving
agent. Close all openings so they are
airtight.
■
If stored in regions characterised by
high humidity, also fill the hydraulic
oil tank to the brim with hydraulic oil
and ensure that the unit is firmly
closed.
Assembly Instructions
Advertisement
Need help?
Do you have a question about the VARIOKIT VBC and is the answer not in the manual?
Questions and answers