Activating Rear Carriage - Peri VARIOKIT VBC Assembly Instructions Manual

B5 Rear carriage

Activating rear carriage

→ Carriage is in an anchored position
= operational mode.
Force progression during operation
The lifting forces from the main frame
chord (23) are transferred to the main
tie rod (53) via the main tie nut (63b).
At the yoke pin (26.1), the force is
transferred to the rear carriage rocker
(26).
The rear carriage rocker carries the
force to the anchor tie rods (52) which
then transfer the force into the
structure.
Step 1
1. Loosen the top main tie nut (63a) in
order to create space. In this posi-
tion, the main tie nut has no support-
ing function.
2. Position the auxiliary tie nuts (61) on
the rear cylinder head, do not
tighten.
(Fig. B5.01)
VBC Balanced Cantilever Hydraulic System – Hydraulic System and Standard Cycle
Assembly Instructions
23
26
52
Fig. B5.01
63a
61
27
63b
53
29
26.1
45