Technical Data; Lifting Device; Vacuum Generation - probst SM-1200 Operating Instructions Manual

4 Technical data

4.1 Lifting device

Max. permissible load
Dead weight
Vacuum storage volume
Temperature range
Sound level (DIN 45 635)
Requirements for the maximum permissible load:
• The specified permissible loads refer to a vacuum of -500 mbar.
•
The load is suction-tight.
• The suction plate is fully occupied by the load.
The values marked with * are valid up to an altitude of 800 m above sea level. Above this altitude, the automatic
switch-off of the vacuum pump is disabled.
The lifting device must not be used above an altitude of 1,600 m above sea level, as the required operating
vacuum cannot be achieved due to the lower air pressure.

4.2 Vacuum generation

Two battery-operated vacuum pumps are used to generate the vacuum.
Pump type
Tension
See operating instructions for the vacuum pump in the appendix.
EN - 30.30.01.04558 - 00 - 09/24
4 Technical data
1,200 kg
See type plate
2,5 l
+3 to +40 °C
76 dB(A)
PM25071-838
12V DC
21 / 53