probst SM-1200 Operating Instructions Manual page 98

1. Carefully lower the load to just above the floor.
2. Unhook the load securing chain (4) and stow it in
the chain box (4.2).
3. Lower the load completely.
4. Ensure that the load cannot slip or tip over.
5. Press the locking button
slide valve (25) against the spring force in the di-
rection of the arrow
6. Slowly raise the lifting device without load.
7.10 Parking the lifting device
NOTE
Damage to the suction plates due to unsuitable parking situation!
•
•
 Switch off the main switch (22).
EN - 30.30.01.04558 - 00 - 09/24
and push the manual
.
The lifting device can be placed on a smooth, level surface for a short time.
Do not store the lifting device on the suction plates.
7 Operation
37 / 53