probst SM-1200 Operating Instructions Manual page 110

✓ The lifting device stands on a stable base.
1. Set the main switch (22) to 0.
2. Loosen the two upper fastening screws (11.1)
and lift off the appliance cover (11).
3. Pull off the vacuum hose and remove the filter
cartridge (16).
4. Blow out the filter cartridge from the inside to the
outside.
5. Replace heavily soiled or damaged filter cartrid-
ges.
6. Reinsert the filter cartridge and connect the va-
cuum hose.
7. Replace the appliance cover (11) and secure it
again with the fastening screws.
8. Before restarting the appliance, check that it is
working properly and that the safety devices are
working properly.
EN - 30.30.01.04558 - 00 - 09/24
9 Maintenance
49