Group ID
--------
------------------
Subnet based VLANs:
Group ID
--------
------------------
console#
Configuring Multicast TV
For an example of configuring Multicast TV, triple play, there are two service
providers each with two customers CPE 1 and CPE 2. The example configuration is
for transmitting multicast streams from both service providers A and B, to each of
the CPE customers. For this purpose port e4 is configured as a trunked port, tagged
for VLANs 1001, 1048, 3000, 3001, with port e1 and e48 configured as the triple
play ports connected to the customer site.
Figure 7. Triple Play Configuration
To configure triple play using CLI, perform the following:
1.
Enter the global configuration mode.
Vlan ID
Vlan ID
-721