4
Command Line Interface
• infinite — Specifies SYSLOG messages are not generated.
Default Configuration
The default value is 5 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example sets the minimum ARP SYSLOG message interval to 10
seconds.
Console # (config)# ip arp inspection logging interval 10
Console # (config)#
show ip arp inspection
The show ip arp inspection EXEC mode command displays the ARP inspection
configuration.
Syntax
show ip arp inspection [ethernet interface | port-channel
port-channel-number]
Parameters
• interface — Specifies an Ethernet port.
• port-channel-number — Specifies a port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
EXEC
Command Usage
There are no user guidelines for this command.
Example
The following example displays the ARP inspection configuration.
Console# show ip arp inspection
IP ARP inspection is enabled.
IP ARP inspection is configured on following VLANs: 2, 7-18
Verification of packet header is enabled
IP ARP inspection logging interval is: 5
Interface
662
seconds
Trusted