Alcatel OS-LS-6224 User Manual page 559

DES key for privacy. (Range: 1-32 characters)
• auth-md5-key md5-des-keys — Indicates the HMAC-MD5-96
authentication level. The user should enter a concatenated hexadecimal
string of the MD5 key (MSB) and the privacy key (LSB). If authentication is
only required, 16 bytes should be entered; if authentication and privacy are
required, 32 bytes should be entered. Each byte in the hexadecimal
character string is two hexadecimal digits. Each byte can be separated by
a period or colon. (16 or 32 bytes)
• auth-sha-key sha-des-keys — Indicates the HMAC-SHA-96 authentication
level. The user should enter a concatenated hexadecimal string of the SHA
key (MSB) and the privacy key (LSB). If authentication is only required, 20
bytes should be entered; if authentication and privacy are required, 36
bytes should be entered. Each byte in the hexadecimal character string is
two hexadecimal digits. Each byte can be separated by a period or colon.
(20 or 36 bytes)
Default Setting
No group entry exists.
Command Mode
Global Configuration mode
Command Usage
If auth-md5 or auth-sha is specified, both authentication and privacy are
enabled for the user.
When a show running-config Privileged EXEC mode command is entered, a
line for this user will not be displayed. To see if this user has been added to
the configuration, type the show snmp users Privileged EXEC mode
command.
An SNMP EngineID has to be defined to add SNMP users to the device.
Changing or removing the SNMP EngineID value deletes SNMPv3 users from
the device's database.
The remote engineid designates the remote management station and should
be defined to enable the device to receive informs.
Example
The following example configures an SNMPv3 user John in group user-group.
Console(config)# snmp-server user John user-group
Related Commands
show snmp users
4
SNMP Commands
535