Service-Acl; Show Access-Lists - Alcatel OS-LS-6224 User Manual

show access-lists

service-acl

The service-acl Interface Configuration mode command applies an ACL to the input
interface. To detach an ACL from an input interface, use the no form of this
command.
Syntax
service-acl {input acl-name}
no service-acl {input}
Parameters
• acl-name — Specifies the ACL to be applied to the input interface.
Default Setting
This command has no default configuration.
Command Mode
Interface (Ethernet, port-channel) Configuration mode.
Command Usage
In advanced mode, when an ACL is bound to an interface, the port trust mode
is set to trust L2-L3 and not to L2.
Example
The following example, binds (services) an ACL to port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# service-acl input macl1
Related Commands
show interfaces access-lists
show access-lists
The show access-lists Privileged EXEC mode command displays access control
lists (ACLs) defined on the device.
Syntax
show access-lists [name]
Parameters
• name — Name of the ACL.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
4
ACL Commands
315