Management Acl Commands; Management Access-List - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

Management ACL Commands

Command
management
access-list
permit
(Management)
deny (Management) Defines a deny rule.
management
access-class
show management
access-list
show management
access-class

management access-list

The management access-list Global Configuration mode command configures a
management access list and enters the Management Access-list Configuration
command mode. To delete an access list, use the no form of this command.
Syntax
management access-list name
no management access-list name
Parameters
• name — Access list name. (Range: 1-32 characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Use this command to configure a management access list. The command
enters the Access-list Configuration mode, where permit and deny access
rules are defined using the permit (Management) and deny (Management)
commands.
If no match criteria are defined, the default is deny.
456
Table 4-21. Management ACL Commands
Function
Configures a management access list and enters the
Management Access-list Configuration command mode. To
delete an access list, use the no form of this command.
Defines a permit rule.
Restricts management connections by defining the active
management access list. To disable this restriction, use the no
form of this command.
Sets the interval that the command interpreter waits until user
input is detected
Sets the password intrusion threshold, which limits the number of
failed logon attempts
Mode Page
GC 4-456
ACL 4-457
ACL 4-458
GC 4-459
PE 4-460
PE 4-461