Rmon Event; Show Rmon Events - Alcatel OS-LS-6224 User Manual

4
Command Line Interface
Related Commands
rmon alarm
show rmon alarm-table

rmon event

The rmon event Global Configuration mode command configures an event. To
remove an event, use the no form of this command.
Syntax
rmon event index type [community text] [description text] [owner name]
no rmon event index
Parameters
• index — Specifies the event index. (Range: 1 - 65535)
• type — Specifies the type of notification generated by the device about this
event. Possible values are: none, log, trap, log-trap.
• community text — If the specified notification type is trap, an SNMP trap
is sent to the SNMP community specified by this octet string.
(Range: 0-127 characters)
• description text — Specifies a comment describing this event.
(Range: 0-127 characters)
• name — Specifies the name of the person who configured this event. If
unspecified, the name is an empty string.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
If log is specified as the notification type, an entry is made in the log table for
each event. If trap is specified, an SNMP trap is sent to one or more
management stations.
Example
The following example configures an event identified as index 10 and for which the
device generates a notification in the log table.
Console(config)# rmon event 10 log
Related Commands

show rmon events

show rmon events
The show rmon events User EXEC mode command displays the RMON event
table.
526