Stack Reload; Stack Display-Order - Alcatel OS-LS-6224 User Manual

• If both forced master units have the same up-time, Unit 1 is elected.
Example
The following example selects Unit 2 as the stack master.
Console(config)# stack master unit 2
Related Commands

stack reload

stack display-order

show stack
stack reload
The stack reload Privileged EXEC mode command reloads stack members.
Syntax
stack reload [unit]
Parameters
• unit — Number of the unit to be reloaded (Range: 1-6)
Default Setting
All units are reloaded.
Command Modes
Privileged EXEC mode
Command Usage
If no unit is specified, all units are reloaded.
Example
The following example reloads Unit 2 of the stack.
Console(config)# stack reload unit 2
Related Commands
stack master
stack display-order
show stack
stack display-order
The stack display-order Global Configuration mode command configures the order
of the units in the display. To return to the default configuration, use the no form of
this command.
Syntax
stack display-order top unit bottom unit
System Management Commands
4
625