Configuring Customer Vlans Using The Cli; Figure 5. Vlan Current Table; Figure 6. Qinq Configuration Example - Alcatel OS-LS-6224 User Manual

Figure 5. VLAN Current Table

12. Select the VLAN ID.
13. Add the ports to the VLAN.
14. Click

Configuring Customer VLANs using the CLI

As an example for configuring QinQ. The following figure illustrates the configuration
example being described.

Figure 6. QinQ Configuration Example

To configure QinQ, perform the following:
1. Enter the global configuration mode.
Console>enable
Console#config
Console (config)#
2. Enter the VLAN configuration mode.
Console (config)# vlan database
Console (config-vlan)#
3. Create VLAN in the VLAN database.
. The customer VLAN is defined, and the device is updated.
-719