• Status — Indicates the connection status between the device and the TACACS+
server. The possible field values are:
• Connected — Indicates there is currently a connection between the device and
the TACACS+ server.
• Not Connected — Indicates there is not currently a connection between the
device and the TACACS+ server.
• Remove — Removes TACACS+ server. The possible field values are:
• Checked — Removes the selected TACACS+ server.
• Unchecked — Maintains the TACACS+ servers.
Web – Click System, WebViewMgmt, Authentication, TACACS+, define the fields,
and click Apply.
CLI – The following is an example of the TACACS+ CLI Commands:
Console(config)# tacacs-server host 172.16.1.1
Console(config)# tacacs-server key
Console(config)# tacacs-server timeout 30
Console(config)# tacacs-server source-ip 172.16.8.1
Defining RADIUS Settings
Remote Authorization Dial-In User Service (RADIUS) servers provide additional
security for networks. RADIUS servers provide a centralized authentication method
for web access.
Default parameters are user-defined, and are applied to newly defined RADIUS
servers. If new default parameters are not defined, the system default values are
applied to newly defined RADIUS servers. The RADIUS Page contains parameters
Figure 3-48. TACACS+ Page
Configuring Authentication Methods
3
4-633
4-634
4-635
4-636
113