4
Command Line Interface
amap discovery time
The time (in seconds) that switch ports in the Discovery state wait for a response to
a "Hello" packet from an adjacent switch.
Syntax
amap discovery time seconds
no amap discovery time
Parameters
• seconds — Discovery transmission timeout value in seconds
(Range: 1-65535 seconds)
Default Setting
30 seconds
Command Mode
Global Configuration
Example
Console(config)#amap discovery time 3000
Console(config)#
amap common time
This command sets the time (in seconds) that switch ports in the Common state wait
before sending a "Hello" packet to an adjacent switch. If there is no reply packet
from an adjacent switch after two timeout intervals, the switch entry for the port will
be removed and port will revert to the Discovery state.
Syntax
amap common time seconds
Parameters
• seconds — Common transmission timeout value in seconds
(Range: 1-65535 seconds)
Default Setting
300 seconds
Command Mode
Global Configuration
Example
Console(config)#amap common time 5000
Console(config)#
show amap
This command displays the current AMAP settings on the switch.
350