Channel-Group - Alcatel OS-LS-6224 User Manual

Syntax
interface range port-channel {port-channel-range | all}
Parameters
• port-channel-range — List of valid port-channels to add. Separate
nonconsecutive port-channels with a comma and no spaces. A hyphen
designates a range of port-channels.
• all — All valid port-channels.
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Commands under the interface range context are executed independently on
each interface in the range.
Example
The following example groups port-channels 1, 2 and 6 to receive the same
command.
Console(config)# interface range port-channel 1-2,6
Related Commands
show interfaces port-channel

channel-group

The channel-group Interface Configuration (Ethernet) mode command associates
a port with a port-channel. To remove a port from a port-channel, use the no form of
this command.
Syntax
channel-group port-channel-number mode {on | auto}
no channel-group
Parameters
• port-channel_number — Specifies the number of the valid port-channel for
the current port to join.
• on — Forces the port to join a channel without an LACP operation.
• auto — Allows the port to join a channel as a result of an LACP operation.
Default Setting
The port is not assigned to a port-channel.
Command Mode
Interface Configuration (Ethernet) mode
Port Channel Commands
4
467