Uploading System Files
The File Upload Page contains fields for uploading the software from the device to
the TFTP server.
Command Attributes
• Firmware Upload — Specifies that the software image file is uploaded. If
Firmware Upload is selected, the Configuration Upload fields are grayed out.
• Configuration Upload — Specifies that the Configuration file is uploaded. If
Configuration Upload is selected, the Software Image Upload fields are grayed out.
• Software TFTP Server IP Address — Specifies the TFTP Server IP Address to
which the Software Image is uploaded.
• Software Destination File Name — Specifies the software image file path to
which the file is uploaded.
• Configuration TFTP Server IP Address — Specifies the TFTP Server IP Address
to which the Configuration file is uploaded.
• Configuration Destination File Name— Specifies the file name to which the
Startup Configuration file is uploaded.
• Configuration Transfer file name — Specifies the Configuration file name that is
uploaded. The possible field values are:
• Running Configuration — Uploads the Running Configuration file.
• Startup Configuration — Uploads the Startup Configuration file.
Web – Click System, System Management, File Management, File Upload. Define
the fields. Click Apply.
CLI – The following is an example of downloading system files using CLI
Figure 3-18. File Upload Page
Managing System Files
3
63