Example
The following example executes an EXEC-level command show vlan.
Console(Config)# do show vlan
VLAN
Name
1
default 2/1-4
10
VLAN0010
11
VLAN0011
20
VLAN0020
21
VLAN0021
30
VLAN0030
31
VLAN0031
91
3928
GuestVLAN
Related Commands
configure
enable
The enable User EXEC mode command enters the Privileged EXEC mode.
Syntax
enable [privilege-level]
Parameters
• privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Setting
The default privilege level is 15.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example enters Privileged EXEC mode:
Console> enable
enter password:
Console#
Port
Type
1/1-2
other
1/3-4
dynamic
1/1-2
static
1/3-4
static
static
static
static
1/1-2
static
1/17
static
User Interface Commands
Authorization
Required
Required
Required
Required
Required
Required
Required
Not required
Guest
4
665