Lldp Med Enable - Alcatel OS-LS-6224 User Manual

are: port-desc, sys-name, sys-desc, sys-cap, 802.3-mac-phy.
Default Configuration
No optional TLV is transmitted.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no guidelines for this command.
Example
In this example, the system name, system description and system capabilities TLVs
are specified to be transmitted from Ethernet port 1/e1.
Console (config)# interface ethernet 1/e1
Console (config-if)# lldp optional-tlv sys-name sys-desc sys-cap

lldp med enable

The lldp med enable Interface Configuration (Ethernet) mode command enables
the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) on an
interface. To disable LLDP MED on an interface, use the no form of this command.
Syntax
lldp med enable [tlv1 ... tlv3]
no lldp med enable
Parameters
• tlv — Specifies the TLV that should be included. Available TLVs are:
network-policy, location, poe-pse. The capabilities TLV is always
included if LLDP-MED is enabled.
Default Configuration
The default configuration is disabled.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no guidelines for this command.
Example
In this example, LLDP MED is enabled on an interface with the network policy TLV.
Console (config)# interface ethernet 1/e1
Console (config-if)# lldp med enable network-policy
4
LLDP Commands
339