Alcatel OS-LS-6224 User Manual page 746

Console>enable
Console#config
Console (config)#
2. Enter the VLAN configuration mode.
Console (config)# vlan database
Console (config-vlan)#
3. Create VLANs for customer port 1 and port 48 for QinQ. Each customer has
separate VLAN.
Console (config-vlan)# vlan 1001
Console (config-vlan)# vlan 1048
4. Create a VLAN for configuring Multicast TV provider A.
Console (config-vlan)# vlan 3000
5. Create a VLAN for configuring Multicast TV provider B.
Console (config-vlan)# vlan 3001
6. Map the internal CPE VLAN 3 to the Multicast TV VLAN 3001.
Console (config)# ip igmp snooping map cpe vlan 3 multicast-tv vlan
3001
7. Map the internal CPE VLAN 4 to the Multicast TV VLAN 3000.
Console (config)# ip igmp snooping map cpe vlan 4 multicast-tv vlan
3000
8. Configure the VLAN membership mode of port e1 as a customer port on VLAN
1001.
Console (Config)# interface ethernet e1
Console (config-if)# switchport mode customer
Console (config-if)# switchport customer vlan 1001
9. Configure port e1 to enable receiving multicast transmissions from a VLAN that
is not the customer port's VLAN.
Console (config-if)# switchport customer multicast-tv vlan add 3000
Console (config-if)# switchport customer multicast-tv vlan add 3001
10. Configure the VLAN membership mode of port e48 as a customer port on
VLAN 1048.
Console (Config)# interface ethernet e48
Console (config-if)# switchport mode customer
Console (config-if)# switchport customer vlan 1048
11. Configure port e48 to enable receiving multicast transmissions from a VLAN
that is not the customer port's VLAN.
Console (config-if)# switchport customer multicast-tv vlan add 3000
Console (config-if)# switchport customer multicast-tv vlan add 3001
-722