Show Ports Security Addresses - Alcatel OS-LS-6224 User Manual

4
Command Line Interface

show ports security addresses

The show ports security addresses Privileged EXEC mode command displays
the current dynamic addresses in locked ports.
Syntax
show ports security addresses [ethernet interface | port-channel
port-channel-number]
Parameters
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Examples
In this example, dynamic addresses in currently locked ports are displayed.
Console# show ports security addresses
Port Status
---- --------
1/e1 Disabled
1/e2 Disabled
1/e3 Enabled
1/e4 Port is a member in port-channel ch1
1/e5 Disabled
1/e6 Enabled
ch1 Enabled
ch2 Enabled
336
Learning
--------
Lock
Lock
Max-addresses
Lock
Max-addresses
Max-addresses
Max-addresses
Current Maximum
------- -------
- 1
- 1
0 1
- 1
0 10
0 50
0 128