Adding Interfaces To The Ip Source Guard Database; Figure 3-90. Interface Settings Page - Alcatel OS-LS-6224 User Manual

3
Configuring the Switch
Command Attributes
• Interface — Displays the interface on which can be defined as Trusted. The
possible field values are:
• Ports — Displays the ports which can be defined as trusted.
• LAGs — Displays the LAGs which can be defined as trusted.
• Interfaces — Contains a list of existing interfaces.
• Status — Indicates if IP Source Guard is enabled or disabled.
• Enable — Indicates that IP Source Guard is enabled on the interface.
• Disable — Indicates that IP Source Guard is disabled on the interface. This is
the default value.
Web – Click Security, DHCP Snooping, IP Source Guard, Interface Settings. Select
an interface, click Modify to define the fields and click Apply.

Adding Interfaces to the IP Source Guard Database

The IP Source Guard Binding Database Page contains parameters for querying IP
addresses to the IP Source Guard Database.
Command Attributes
• TCAM Resources — The IP Source Guard Database uses TCAM resources for
managing the database. TCAM resources status is checked in different time
frequencies.
• Retry Frequency — The frequency in which the TCAM Resources are checked.
• Never — TCAM Resources never checked
• Retry Now — TCAM Resources are checked now
• MAC Address — Indicates the MAC addresses recorded in the IP Source Guard
Database. The Database can be queried by MAC address.
184

Figure 3-90. Interface Settings Page